Quite a few homes have fireplaces, but not all of them are fit to be used as they are because they have not been cleaned in so long that when you do try to use them, it fills the house with smoke. This can do a lot of damage to the inside of the home, including ruin the paint on your walls, your curtains, and discolor your carpet. It is also a health risk, since breathing this in is not good for anyone, but the elderly, people with allergies, pets, and children are especially affected. Fortunately, though, in most situations you can make a fire that will not smoke up your house without much trouble as long as you follow a few rules.
The damper of your chimney needs to be open before you do anything. Burn some paper or other easily combustible materials in the fireplace, because you want to warm the chimney up. Cold air in the chimney is will push the warm air down and cause the smoke to fill up the room.
Open up the windows in the house and make sure that there is enough air circulating to ignite the fire. A home that is insulated well might not have enough of a draft to allow the wood to catch on fire.
You should also have some fireplace bricks underneath the grill to add some more air circulation to the process. More draft in the fireplace will make it easier for the fire to ignite.
The top of the fireplace also needs to be cleaned out regularly, since anything that gets stuck in it like leaves, sticks, bird nests can keep the smoke from being able to escape and so it floods back into the house, which is exactly where you do not want it.
You should also have the fireplace cleaned by a professional cleaning service if possible, since a layer of creosote is likely built up on the inside of the chimney. This is a tar-like substance that results from burning wood in the fireplace and if your chimney has not been professionally cleaned before and you have lived in your house for many years, then it is time for it to be. Creosote can catch on fire and cause the whole house to burn down, so having it cleaned out is essential.
To keep your fireplace functioning the way that it should, you need to know how to use it and take care of it and by the time winter gets to you, you will be able to enjoy your fireplace once again.
Jim Corkern is a writer and promoter of quality
South Carolina Water Damage Restoration and and other states such as
Chicago Water Damage Restoration companies across the united states.
Thursday, October 18, 2007
Mold Related Diseases
Exposure to mold for a long period of time can cause all different kinds of health problems and individual diseases, but some of us do not really understand just how inconvenient and even deadly some of these conditions can be. Whether the disease or condition ends in “osis” or “mycosis” does not really matter as much as the actual symptoms of the disease, which can even lead to death in some cases.
Those who are the most threatened by mold exposure are typically those who have weak constitutions. This can be an infant or a small child, an elderly person with health problems, or someone who has HIV or AIDS. Even perfectly healthy people can succumb to the effects of breathing in mold spores or letting it come into contact with their skin, but it usually takes longer for these individuals to develop symptoms.
The typical symptoms of these diseases can be mild flu or allergy symptoms like coughing, sneezing, or fever or they can be more serious such as coughing up blood, respiratory infections, or yeast infections. The kind of symptoms that surface usually depend upon the exact kind of infection you have developed, but some conditions, such as the presence of aspergilloma (or fungus balls) in the body have no symptoms for quite a while before they are finally detected.
Caused by molds in the genus called Aspergillis, aspergilloma is a fairly serious condition. When called by the common name of “fungus balls”, they not only sound pretty nasty; they actually are. They invade any pre-existing cavities in the organs of your body and those who are at the most risk to develop these are typically those who have had conditions like cancer or tuberculosis. Without any symptoms in the beginning, you probably will not realize that you have aspergilloma living inside you without your doctor performing a chest x-ray or other detection technique.
Penicilliosis is a disease that is native to the region of southeast Asia where the mold that causes it lives and this is referred to as the third most common infection that occurs in patients with HIV and AIDS in the region. Since the mold that causes this, Penicillium marneffei, exists only in this region, cases of this infection are fairly confined to this region of the world. Those with HIV or AIDS, however, who are traveling back and forth to the region should be very cautious because this infection can be fatal.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.localrestoration.com and
http://www.moldrestorationusa.com
Those who are the most threatened by mold exposure are typically those who have weak constitutions. This can be an infant or a small child, an elderly person with health problems, or someone who has HIV or AIDS. Even perfectly healthy people can succumb to the effects of breathing in mold spores or letting it come into contact with their skin, but it usually takes longer for these individuals to develop symptoms.
The typical symptoms of these diseases can be mild flu or allergy symptoms like coughing, sneezing, or fever or they can be more serious such as coughing up blood, respiratory infections, or yeast infections. The kind of symptoms that surface usually depend upon the exact kind of infection you have developed, but some conditions, such as the presence of aspergilloma (or fungus balls) in the body have no symptoms for quite a while before they are finally detected.
Caused by molds in the genus called Aspergillis, aspergilloma is a fairly serious condition. When called by the common name of “fungus balls”, they not only sound pretty nasty; they actually are. They invade any pre-existing cavities in the organs of your body and those who are at the most risk to develop these are typically those who have had conditions like cancer or tuberculosis. Without any symptoms in the beginning, you probably will not realize that you have aspergilloma living inside you without your doctor performing a chest x-ray or other detection technique.
Penicilliosis is a disease that is native to the region of southeast Asia where the mold that causes it lives and this is referred to as the third most common infection that occurs in patients with HIV and AIDS in the region. Since the mold that causes this, Penicillium marneffei, exists only in this region, cases of this infection are fairly confined to this region of the world. Those with HIV or AIDS, however, who are traveling back and forth to the region should be very cautious because this infection can be fatal.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.localrestoration.com and
http://www.moldrestorationusa.com
Mold Remediation Cleanup Equipment
When you are talking about cleaning up mold and removing it from your home, there are a few different methods that you can use. Depending on the size and type of infection, you might want to use one technique before trying the other, however. Large scale infections can be handled by you if you know what you are doing and have the proper equipment to assist you.
Using a wet vacuum to clean up standing water in your home is a good thing to start with. This is especially important if you suspect Stachybotrys chartarum or Stachybotrys atra have made a home out of an area of your basement a home. Stachy loves standing water and cellulose-based items such as cardboard and paper, so removing standing water from any part of your home is important to keeping this kind of mold from growing. It does not always need standing water in order to grow, but it helps significantly. You should be warned, however, that if an infection already exists, you should probably call a professional to deal with this particular mold because it has been given the deadly label of “toxic”.
A vacuum cleaner equipped with a HEPA filter can assist you when you are performing any invasive procedures on your home to remove the mold infection that exists. This usually means tearing out drywall or other building materials or even just removing contaminated wallpaper. The HEPA filter removes all particles from the air that is being collected by it and releases clean air back into your home. When emptying the vacuum’s receptacle, you do not want to touch any of this material with your bare hands. When dumping it into a garbage bag, be careful to stir up the contents into the air you are breathing as little as possible.
You will also want to have a good respirator if you are planning on doing any remediation on your own. These can be anything from a simple N-95 respirator that you can find in hardware stores all the way to an electric powered air purifying respirator that requires training in order to use it effectively.
You should also wear some breathable, protective clothing made of a material such as TYVEK when doing your own remediation. Anyone that you hire should also be wearing these, as well, as it is a sign of just how professional their company may or may not be.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
mold remediation companies across the united states.
Using a wet vacuum to clean up standing water in your home is a good thing to start with. This is especially important if you suspect Stachybotrys chartarum or Stachybotrys atra have made a home out of an area of your basement a home. Stachy loves standing water and cellulose-based items such as cardboard and paper, so removing standing water from any part of your home is important to keeping this kind of mold from growing. It does not always need standing water in order to grow, but it helps significantly. You should be warned, however, that if an infection already exists, you should probably call a professional to deal with this particular mold because it has been given the deadly label of “toxic”.
A vacuum cleaner equipped with a HEPA filter can assist you when you are performing any invasive procedures on your home to remove the mold infection that exists. This usually means tearing out drywall or other building materials or even just removing contaminated wallpaper. The HEPA filter removes all particles from the air that is being collected by it and releases clean air back into your home. When emptying the vacuum’s receptacle, you do not want to touch any of this material with your bare hands. When dumping it into a garbage bag, be careful to stir up the contents into the air you are breathing as little as possible.
You will also want to have a good respirator if you are planning on doing any remediation on your own. These can be anything from a simple N-95 respirator that you can find in hardware stores all the way to an electric powered air purifying respirator that requires training in order to use it effectively.
You should also wear some breathable, protective clothing made of a material such as TYVEK when doing your own remediation. Anyone that you hire should also be wearing these, as well, as it is a sign of just how professional their company may or may not be.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
mold remediation companies across the united states.
Ordinary Water Damage Prevention Tips
The majority of water damage to your home can be avoided if you just take a few simple steps. They are not as hard as you might think and you will be safeguarding the value of your home for years to come. Repairs for water damage do not typically come cheap unless you do it yourself and use less than ideal building materials, so why not do your best to avoid the problem altogether?
You might not be thinking about the structural integrity of your home when the washing machine or the bath tub overflows, but you probably should be. If you are a forgetful person that allows this to happen a lot more than it probably should, you could actually be doing quite a bit of damage to the floor of your home. Overflows like this should be avoided at all costs, but we are all a little forgetful sometimes.
Something that we also do not typically think about most of the time is whether or not the steam that exists in our kitchens and bathrooms actually has anywhere to go while we are bathing or cooking dinner. The sad fact is that if the steam does not have anywhere to go, it will stick to your walls, ceiling, and cabinets and be completely absorbed by them. When drywall absorbs too much water, the paper on the outside of it can start to sag and eventually, the entire board becomes weakened by it. Combine that with the unsightly appearance of water stains and you have a fair sized problem on your hands. The solution is to install a steam vent into both of these rooms near the source of the steam.
Keep your rain gutters cleaned out every fall. The purpose of the gutters is to collect the water that slides off of your roof when it rains, channel it to downspouts, and eventually down to the ground and away from the foundation of the home. Water that settles around the foundation of your home can be a real problem if you let it happen over years of time, because it can cause the home to start sinking into the ground.
Any leaks that you find in your roof need to be fixed as often as necessary, because a roof leak can ruin not only ceiling drywall, but also the fiberglass insulation that you might have in your attic. This insulation becomes completely useless and heavy when it gets wet and can eventually cause the drywall underneath it to collapse.
Jim Corkern is a writer and promoter of quality
Mold Remediation and
water damage restoration companies across the united states.
You might not be thinking about the structural integrity of your home when the washing machine or the bath tub overflows, but you probably should be. If you are a forgetful person that allows this to happen a lot more than it probably should, you could actually be doing quite a bit of damage to the floor of your home. Overflows like this should be avoided at all costs, but we are all a little forgetful sometimes.
Something that we also do not typically think about most of the time is whether or not the steam that exists in our kitchens and bathrooms actually has anywhere to go while we are bathing or cooking dinner. The sad fact is that if the steam does not have anywhere to go, it will stick to your walls, ceiling, and cabinets and be completely absorbed by them. When drywall absorbs too much water, the paper on the outside of it can start to sag and eventually, the entire board becomes weakened by it. Combine that with the unsightly appearance of water stains and you have a fair sized problem on your hands. The solution is to install a steam vent into both of these rooms near the source of the steam.
Keep your rain gutters cleaned out every fall. The purpose of the gutters is to collect the water that slides off of your roof when it rains, channel it to downspouts, and eventually down to the ground and away from the foundation of the home. Water that settles around the foundation of your home can be a real problem if you let it happen over years of time, because it can cause the home to start sinking into the ground.
Any leaks that you find in your roof need to be fixed as often as necessary, because a roof leak can ruin not only ceiling drywall, but also the fiberglass insulation that you might have in your attic. This insulation becomes completely useless and heavy when it gets wet and can eventually cause the drywall underneath it to collapse.
Jim Corkern is a writer and promoter of quality
Mold Remediation and
water damage restoration companies across the united states.
Stop Snow Mold From Eating Your Lawn
Most of us enjoy a nice patch of thick green grass under our feet during the spring and summer, but unfortunately for those people who live in areas that get thick blankets of snow, this might actually be something that they take for granted. Mold becomes a problem for some lawns during the winter time and can absolutely wreak havoc on them while that thick and beautiful blanket of snow graces your front yard. By the time it melts, you will be left with dead circular patches of grass all over and not a clue as to how they got there.
Mold is a problem generally when a thick and wet layer of snow falls on your front yard before the ground has had a chance to freeze and render the mold spores and fungus living there dormant. This means that when the blanket of snow is resting on your lawn and insulating it throughout the winter, mold is free to run amok and have a feast on it.
The symptoms of this lawn disease are typically circular patches of dead grass all over the lawn, but if the infection is severe, then you may not even be able to see these as circular patches due to the amount of grass that has been killed.
There are at least two different kinds of snow mold and these are pink and gray. The pink variety of snow mold seems to be the most dangerous of the two, as it is able to reach the roots of the grass and completely kill it. This is caused by the mold Microdochium nivale and can be anywhere from a light pink to a deep salmon-pink type color.
Gray snow mold is, as you would guess, anywhere from gray to white in color, but it is not caused by a specific mold. It is caused by molds in the genus Typhula. These molds do not affect more than the blades of grass and will not kill the grass down at the roots.
Snow mold occurs most often when a blanket of snow falls on a patch of ground that is not frozen and does not melt for an extended period of time. It can also occur, however, when fall leaves are let to cover a patch of grass for a long time. The best thing that you can do to prevent snow mold is to keep mowing your lawn as long as it keeps growing and do not fertilize your lawn less than six weeks before cold weather rolls in.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
Mold is a problem generally when a thick and wet layer of snow falls on your front yard before the ground has had a chance to freeze and render the mold spores and fungus living there dormant. This means that when the blanket of snow is resting on your lawn and insulating it throughout the winter, mold is free to run amok and have a feast on it.
The symptoms of this lawn disease are typically circular patches of dead grass all over the lawn, but if the infection is severe, then you may not even be able to see these as circular patches due to the amount of grass that has been killed.
There are at least two different kinds of snow mold and these are pink and gray. The pink variety of snow mold seems to be the most dangerous of the two, as it is able to reach the roots of the grass and completely kill it. This is caused by the mold Microdochium nivale and can be anywhere from a light pink to a deep salmon-pink type color.
Gray snow mold is, as you would guess, anywhere from gray to white in color, but it is not caused by a specific mold. It is caused by molds in the genus Typhula. These molds do not affect more than the blades of grass and will not kill the grass down at the roots.
Snow mold occurs most often when a blanket of snow falls on a patch of ground that is not frozen and does not melt for an extended period of time. It can also occur, however, when fall leaves are let to cover a patch of grass for a long time. The best thing that you can do to prevent snow mold is to keep mowing your lawn as long as it keeps growing and do not fertilize your lawn less than six weeks before cold weather rolls in.
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
Subscribe to:
Posts (Atom)
